Samsung digimax l700 service manual

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre.

Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a fire or electric shock. This may cause a fire or electric shock.

This could pose a risk of electric shock. If an accident should occur, please consult a doctor immediately. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool. This may cause heat to build up and distort the camera body or cause a fire.

Always use the camera and its accessories in a well-ventilated area. Do not touch the flash after using it continuously. It may cause burns. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.

Zoom T button Digital zoom. Battery chamber. Identification of features. Connecting to a Power Source. We recommend using batteries for a digital camera Within a year from the date of manufacture. The batteries are listed below.

Battery can lose power over time and are prone to leaking if kept inside the camera. This is perfectly normal. This may cause damage to the battery chamber cover. Inserting the memory card. Doing so may damage the memory card slot. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card. Please consult the enclosed manual for using the MMC Cards. Card pins. Write protect switch. The SD memory card has a write protect switch that prevents image files from being deleted or formatted.

By sliding the switch to the bottom of the SD memory card, the data will be protected. By sliding the switch to the top of the SD memory card, the data protection will be cancelled. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.

The recording times can be changed by the zoom operation. These are listed below :. Chinese, T. LCD monitor indicator.

Starting the recording mode. How to use the AUTO mode. Please select this mode for quick and easy picture taking with minimal user interaction. Insert the batteries p.

Insert the memory card p. As this camera has a 20MB internal memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card.

Press the power button to turn on the camera. Select the AUTO mode by rotating the mode dial. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button to capture an image. If the auto focus frame turns to red when you press the shutter button down half way, It means that the camera cannot focus on the subject.

Should this be the case, the camera is unable to capture an image clearly. You can still manually configure all functions except the aperture value and shutter speed. Press the menu button to configure advanced functions such as image size p. You can manually configure all functions with the aperture value and shutter speed. If the various white balance modes aren't enough for you, the L also lets you tweak the individual red, blue, and green color channels.

While not technically a white-balance setting, it does let you change how colors look in your shots. Most cameras include black-and-white, sepia, and various tinted color modes, but the L's much more precise, customizable color controls surprised us.

Samsung's menus may be simple, but getting to them can be confusing. The mode button simply toggles between still photo and movie modes, but it's labeled with a large "M," a symbol that usually denotes manual shooting mode. The effects button, labeled with a cryptic "E," can apply a series of colors and highlight overlays to your shot, helping you frame and tint your photos.

These strange buttons won't cause much of a problem once you get used to them, but they'll likely confuse new users and confound your friends if you hand off the camera so you can get into a shot. In our tests, the Samsung L performed acceptably for a budget camera, though it felt a bit sluggish for our tastes.

The camera took 2. Shutter lag measured 0. Between shots, the camera requires an irritating 1. With the onboard flash enabled, the wait extended to 2. Continuous-shooting mode yielded an average of 0. For a budget camera, the L produces decent enough photos, though close inspection reveals some image-quality flaws. While the camera's meter does a good job of determining exposures, even in some tough scenes, we saw image artifacts in all of our test shots. Text and hair often appeared fuzzy , and extremely fine details such as threads and wood grain sometimes completely disappeared into an indistinguishable blur.

Noise turned up at higher sensitivity settings, but certainly no more than most other digital cameras in this price range. Try to plug it into the Sony Camera and if it doesn't fit, it is not compatible with that camera.

Sometimes, chargers don't have manuals. Need manual for samsung model s camera? Samsung Digimax S Digital Camera. I have taken the memory card out, re-charged, cleaned and looked at the manual for this camera. I can not find anything on how to deactivate this. I do not have a switch next to my camera or memory chip to switch over. I read the suggestion on flipping the switch I do not have one. I have no switch on any part of my camera just all the buttons for mamory etc.

SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper Samsung SL Digital Camera.