Best graduate program mechanical engineering

Research at Duke MEMS addresses fundamental and applied problems, with particular strength in aerospace engineering, dynamics, controls robotics, materials science biomaterials, mechanics, design computing, thermal fluids energy. Johns Hopkins University. Ranked as: 12 in Best National University. We welcome the opportunity to review your graduate application for possible admission to our graduate programs, as our professors will be seeking graduate students in all of our research areas for the fall and spring semesters.

No academic degree is required, but the applicant should have achieved very high scores on the Graduate Record Examination GRE. Graduate application process this explains what you need before you application. Northwestern University. Ranked as: 13 in Best National University.

For the highly selected applicants from industry or national labs having demonstrated computational capabilities and the management support, it may be possible in the future to complete the entire curriculum using online resources. Students in this program will acquire highly-marketable skills that are of great demand in several industry sectors. Washington University in St Louis. Ranked as: 14 in Best National University. The quantitative requirement for the PhD degree in Mechanical Engineering is 72 credit hours.

Of these, 36 to 48 units must be course credit, and 24 to 36 units must be research credit, MEMS Units earned toward a previous MS in Engineering may be counted toward these totals. Our PhD students are fully funded, including full tuition support and health insurance. Cornell University. Ranked as: 15 in Best National University. The department values experiential and project-based learning, and the master's research, design, or development project is a major component of the degree.

Students typically finish the degree in one-and-a-half to two years and must complete a master's thesis, considered the cornerstone of the program. Research or project work for the thesis is conducted under a senior or principal research scientist in the Mechanical Engineering department. The program consists of 72 credit units, including 48 graduate credit units and at least one graduate math course, but not including thesis preparation.

Visit the Massachusetts Institute of Technology's website. Stanford University's Master of Science in Mechanical Engineering is well suited for students who plan to work in industry as mechanical engineering professionals. The program is offered through the Department of Mechanical Engineering, which emphasizes engineering solutions to societal problems and has a particular focus in energy, transportation, and health.

The degree requires 45 units that must be completed within three years. A master's thesis is not required for the program, but students can get involved in research projects and work with a faculty advisor on research.

The university also offers a Design Impact specialization of the Mechanical Engineering degree, as well as a general Master of Science in Engineering degree for students who want an interdisciplinary course load and experience. An MS in Mechanical Engineering can also be completed by part-time students in three to five years through Stanford's Center for Professional Development. Visit Stanford University's website. Oakland University's Master of Science in Mechanical Engineering degree aims to prepare students for a career in mechanical engineering or for further graduate study in the field.

The degree can be completed by full-time students or part-time students who also work in industry, as classes generally take place in the late afternoon and evening. To complete the degree, students must finish 32 graduate credit hours, of which 24 should be approved courses in the School of Engineering and Computer Science. Students work with a master's advisor to determine their course of study and are also encouraged to complete a graduate engineering project or master's thesis research.

Visit Oakland University's website. Ohio State University's Master of Science in Mechanical Engineering program allows students to deepen their knowledge in mechanical engineering and conduct original research in the field. The program emphasizes interdisciplinary research and collaboration with other departments to help solve important problems in engineering.

The university offers students a thesis option and non-thesis option to complete the program, both of which require at least 30 graduate credit hours. The DME offers a thesis and non-thesis option for students to choose between, and students must maintain a 3.

The degree is also offered online. The degree consists of 31 credits and must be completed within six years. The degree requires a thesis and a course in mathematics. The program is very flexible as students work with an advisor to craft a course of study and research plan that is tailored to their specific interests or needs.

Students can study subjects like combustion, roto dynamics, thermodynamics, nanotechnology, and acoustics, among many others. Students can choose between a thesis and a non-thesis option and all students are eligible to graduate after accumulating 30 credits.

The DME also offers the possibility of receiving a Nuclear Engineering Graduate Certificate after students take at least nine credits in the field. The degree consists of 30 credits and is available in either a thesis or non-thesis version. Students must take at least one course from three of four concentrations offered by the department, and are allowed to take the rest of their courses as electives, enabling them to focus their degree according to their interests.

There are also additional tracks in the program in Automotive Engineering, Modeling and Simulation, and Controls. Undergraduate students at UW can also choose to pursue a one-year accelerated MSE through the department as well.

The program offers three different start dates, and applicants must submit GRE scores, and three letters of recommendation as well as transcripts. The degree consists of 30 credits and students can either choose to take prescribed courses in one of four concentrations or can construct their own course of study in consultation with a graduate advisor.

The J. The degree consists of 30 credits and students are required to prepare a portfolio of their work over the course of the degree which is assessed at the end of the program.

The program also offers some of its courses online, which adds to the convenience of the program. Applicants must submit unofficial transcripts, three letters of recommendation, and GRE test scores for consideration for the program. One of the largest universities in the country, Ohio State University is a public research university located in Columbus, OH.

Students can choose between a thesis and a non-thesis option. Overall the degree consists of 30 credits. The DMAE offers specializations in several areas, including energy and environmental quality, robotics, automation and autonomy, bioengineering, and micro and nanotechnology, among others. Paul, MN. The program has a thesis option, a project option, and a coursework option to choose between.

Both the thesis and project options require a final oral defense for graduation. The program is large, with students enrolled. Application requirements include unofficial transcripts, a personal statement, GRE scores, and letters of recommendation.

This decision is meant specifically to assist student leaders in business and deepen their knowledge of technology. The Aerospace concentration also comes with an Aerospace Graduate Certificate. Students are required to completed 30 credits of specialized graduate-level courses, an internship experience, or conduct a research project. The Whiting School of Engineering provides a Master of Mechanical Engineering which is designed as an engineering program for professionals in a variety of fields.

The degree consists of ten courses which must be completed within five years. Students choose an area of study which determines the focus of their coursework. Located in Pasadena, CA, California Institute of Technology is a small private research university, whose programs focus on postgraduates.

The degree is designed primarily to be paired with the Ph. Students take core classes in engineering, then have elective courses in engineering, mathematics, and research focused classes. All students are required to participate in the Graduate Engineering Seminar held by the department, where students are introduced to the research of faculty and other students. The large, private research university offers several specializations with three interdisciplinary MS programs.

Student can choose a thesis or non-thesis option and the program can be completed in as little as nine months. The University of California, Los Angeles is a public research university and part of the states university system. The degree consists of 36 credits and students can choose to pursue a capstone or thesis option.

The capstone option requires a comprehensive examination. There are six areas of study for students to choose between. Options include structural and solid mechanics, micro-electro-mechanical systems, and heat and mass transfer, among others.

The average time for students to complete the program is one and a half years, though students must finish within three years. Admission requires three letters of recommendation, transcripts, GRE scores, and a personal statement.

The University of Michigan is a public research university providing a credit Master of Science in Engineering. Students of U of M can choose between a coursework option, a thesis option, or a project option.