Installing pavnet pavers

Lastly, only prepare as much area with the bedding course as you can lay the pavers on that day, or you may have to re-level the whole area due to unexpected rain or people walking on the area. By following the above instructions, you will have a proper base to support your pavers and ensure long-lasting quality of your project.

Unilock provides an excellent technical guide for the proper installation of pavers, so please refer to it for details. To avoid common mistakes, follow these steps:. As of now, your project area is beginning to take shape with a solid prepared base.

The next step is laying the pavers where you can finally begin to see your plan take action! The following guidelines will help ensure your project is exactly what you have imagined.

Share this. Consult your local dealer for further guidance. Do not place plastic under any paving application Some people place plastic believing this will prevent weed growth. Do not dump in your base materials. Take your time. This will vibrate sand into the joints, but more importantly seat the pavers into the bedding sand.

Once finished sweep off the excess sand. If you are using polymeric sand, follow the manufacturers instructions. EMAIL: designer mypatiodesign. My Account 0. Shopping Cart. My Account. Welcome to MyPatioDesign. Login Create Account. Step 2. Step 3. Step 4. Step 5. Step 6. Step 7. Step 8. Tags: How-To's. Apr 06, Steve Combs. Comments 0. Leave a comment. Please note: comments must be approved before they are published. These examples use pavers that are 7. A square foot equals square inches.

When you shop for pavers, look for planning guides that list the square footage per piece for various pavers — including those with irregular shapes — and that provide information to help you estimate your needs if you use a combination of pavers with different sizes. The excess should account for breakage, pavers that you need to cut and replacements for future repairs. Determine the amount of paver base necessary. Paver base is gravel that creates a solid base and helps the area drain properly.

The paver base for a patio or walkway should be 4 inches deep when compacted. The calculation below factors in compaction. This will help lengthen the lifespan of the pavers and prevent cracking. Estimate the amount of paver sand you need. The sand holds the pavers in place and allows you to adjust them. The paver sand needs to be 1 inch deep. The calculation below accounts for sand filtering into the paver base and into the joints between the pavers.

Calculate the perimeter of your project. This figure defines how much paver edge restraint you need. Calculate the required quantity of paver edge restraints. The example below uses paver edge restraints available in 6-foot sections.

Measure the area for the patio or walkway in the desired location. The extra space will allow you to install paver edge restraints around the patio or walkway to hold the pavers in place. If your design is rectangular, check the layout for square. Measure the distance diagonally between the corners. If the two diagonal measurements are equal, the area is square.

Adjust the layout as needed. Excavate at least 6 inches of soil to maintain this slope. Periodically check the depth and slope. The ground should always slope away from structures for proper drainage. Use a rake to spread paver base to a compacted thickness of four inches. Mark the area. Use twine and sticks to mark the area where you will be laying your pavers and use it as a guide during the process.

Excavate the soil. You will need to excavate 8 to 9 inches and then firmly compact the soil. Be sure to measure once done so that your patio, driveway, or walkway does not accidentally slope in any one direction.

Lay the base. Your pavers should not be placed directly onto the soil. Instead, they must be placed on top of a gravel base. High-quality, Class 2 Road Base is preferred for this type of project, and you will need enough to be 4 to 6 inches deep throughout the entire area.

If the concrete pavers are only being used for foot traffic, you can get by with a base that is only 3 to 4 inches deep. Place the drainage system. If the area is prone to flooding, you may want to install a drainage system to ensure that the area remains free of standing water. There are several types of solutions you can use with the objective being to direct water away from the area using pipes or gravity.

Compact the base. This is a critical step for ensuring that your pavers remain secure and do not shift over time. The base must be firm and secure. Lay bedding sand. Placed on top of the gravel base, bedding sand provides a smooth surface for your concrete pavers to be placed on.

The sand needs to be 1 inch thick and perfectly leveled, the sand provides a gap and allows the pavers to be compacted. Place concrete paving stones.